A coworker is able to unselect an entity after he has picked it in the move or copy command by clicking on it again. Does anyone know if there is a preference that you can change to be able to do this.
This has been covered here before. You shouldn't be able to in v.11 or earlier.
Thanks! - Josh
Do. Or do not. There is no try.
Josh's Digital Downloads is come back online soon. Stay tuned. (soon is a relative term)
Do. Or do not. There is no try.
Josh's Digital Downloads is come back online soon. Stay tuned. (soon is a relative term)
Has every one updated to the most recent version? Are the version numbers the same on all PC's?
AJ Blasio (aka Tony)
DataCAD 18 (DataCAD User since v5)
Windows 10
Intel CORE i5
8GB Ram
DataCAD 18 (DataCAD User since v5)
Windows 10
Intel CORE i5
8GB Ram
If all are updated to the most recent version then I would try copying the dcadwin.exe file from the PC where deselecting is possible to all the other machines.
Just a thought that might be worth a try.
Just a thought that might be worth a try.
AJ Blasio (aka Tony)
DataCAD 18 (DataCAD User since v5)
Windows 10
Intel CORE i5
8GB Ram
DataCAD 18 (DataCAD User since v5)
Windows 10
Intel CORE i5
8GB Ram
This is a new feature of DataCAD 12. It was prototyped during the DataCAD 11 development cycle, and at one point an update was inadvertently posted that had this feature turned on for our in-house testing purposes. Your associate must have installed the update during that brief period of time.
Since this feature is not intended to be in DataCAD 11, and was not thoroughly tested in that version, the update that contained this feature was taken down and replaced by the current DataCAD 11.08.01 update, which does not include this feature. If you manually download and install the update to 11.08.01, this feature will be turned back off.
Since this feature is not intended to be in DataCAD 11, and was not thoroughly tested in that version, the update that contained this feature was taken down and replaced by the current DataCAD 11.08.01 update, which does not include this feature. If you manually download and install the update to 11.08.01, this feature will be turned back off.
Mark Toce
DATACAD LLC
Sales: 1-800-394-2231 | info@datacad.com
Support: 860-217-0567 | techsupport@datacad.com
DATACAD LLC
Sales: 1-800-394-2231 | info@datacad.com
Support: 860-217-0567 | techsupport@datacad.com
Nice to have an official answer on this "situation".
Thanks Mark.
Thanks Mark.
Pay it Forward!
Well my 11.08.01 (I don't recall patching, got CD's this August) has this "feature" and I am not giving it back!
Rashid Garuba
Windows 7 64bit, Datacad 17, Chief Architect X7
CPU: Athlon FX8350 , 16G
VIDEO: GeForce GTX 760 2G
http://www.aaihomeplans.com
Windows 7 64bit, Datacad 17, Chief Architect X7
CPU: Athlon FX8350 , 16G
VIDEO: GeForce GTX 760 2G
http://www.aaihomeplans.com
Just don't come back cryin if something goes wacky on ya
Thanks! - Josh
Do. Or do not. There is no try.
Josh's Digital Downloads is come back online soon. Stay tuned. (soon is a relative term)
Do. Or do not. There is no try.
Josh's Digital Downloads is come back online soon. Stay tuned. (soon is a relative term)
joshhuggins wrote:Just don't come back cryin if something goes wacky on ya
Yeah. and don't come running to us if you break your legs!
Pay it Forward!
Who is online
Users browsing this forum: No registered users and 67 guests