Hi guys,
Was just hoping that you could help us out a little bit. The issue we are having is that or consultant sends a drawing from AutoCAD and the Square meter symbol they use converts in DataCAD as something like /{2}/ instead of the little 2. So we see for example "435m/{2}/" (minus the quotations) at one point they changed something on their end with the little 2 and it came through as "435m@" (minus the quotations). I have tried searching the forum not was to have not luck on this exact issue, on the main DataCAD website i found fonts that are used in AutoCAD and tried installing them they didn't install but i don't think that is what the issue would be.
We are using DataCAD12 with the latest update.
Thanks Eyl ><
Was just hoping that you could help us out a little bit. The issue we are having is that or consultant sends a drawing from AutoCAD and the Square meter symbol they use converts in DataCAD as something like /{2}/ instead of the little 2. So we see for example "435m/{2}/" (minus the quotations) at one point they changed something on their end with the little 2 and it came through as "435m@" (minus the quotations). I have tried searching the forum not was to have not luck on this exact issue, on the main DataCAD website i found fonts that are used in AutoCAD and tried installing them they didn't install but i don't think that is what the issue would be.
We are using DataCAD12 with the latest update.
Thanks Eyl ><
when you have done things right, it will seem like you have done nothing at all.